металообробні станки / інші станки для обробки металів
Виробник: DMG MORI
Модель:DMF 260|11
Номер позиції: 166192321
Кількість: 1
Дата: 09.01.2025
Місцезнаходження:
Німеччина
Ціна:
Seller-item-No.:030318
| Technical Data | |
| Feed rate longitudinal/transverse/vertical | 80000/80000/80000 mm/min |
| Rapid traverse longitudinal/transverse/vertical | 80/80/80 m/min |
| General | |
| in travelling column construction NEW DMG MORI Design swivel head (B-axis) speed range 20 up to 10,000 rpm motor spindle with 52/42 kW (40/100%DC) tool taper HSK-A100 DIN 69893 tool clamping according to DIN 69872; Control: CELOS with Siemens 840D sl Operate | |
| Tool changer | |
| Type of magazine | Chain |
| Type of gripper | Double gripper |
| Number of tools | 60 |
| Max. tool weight | 12 Kg |
| Max. tool length | 500 mm |
| Max. tool diameter with occupied adjacent pockets | 115 mm |
| Max. tool dia. with free neighbouring pockets | 160 mm |
| Working area 1 | |
| Longitudinal | 2600 mm |
| Cross | 1100 mm |
| Vertical | 900 mm |
| Direct measuring system | Direct path measuring system |
| Cabine | Full protection cabin |
| Dynamic package for DMF 260 linear (Y1100) | Dynamic package for DMF 260 linear (Y1,100 mm) linear drive X-axis with 80 m/min // 262.48 ft/min rapid move XYZ 80/60/60 m/min // 262.48/196.86 ft/min, Acceleration XYZ 5/6/6 m/s² // 16.4/19.68 ft/s² Active chiller for main spindle and Linear motor mag |
| Rigid table with integrated rotary axis (leftside) | Rigid table with integrated round table d 1050 mm // 41.3 in, located in the left working area table load max. 1,200 kg// 2,644 lbs hydraulic clamped in position |
| Table surface 3200 x 1100 (Ø 1050) mm | |
| Clamping hydraulics,2 circuits,Rigid-/Round table | Clamping hydraulic for rigid/integrated round table, 30-240 Bar, 2 circuits |
| Rotation speed max.4. Axis 50 rpm | |
| Distance between T-Slots 100 mm | |
| Number of Slots 11 | |
| Slot width 18 mm | |
| Removable partition wall DMF260 (Y1100) | Partition wall removable for pendulum machining DMF260, 2 working spaces (possible with integrated round table) |
| Tool magazine 60 places SK50/HSK-A100 | Tool magazine 60 places SK50/HSK-A100 Chain type with double gripper |
| Mechanical setup station | Mechanical setup station SK50/HSK-A100 |
| Load support for tool magazine | Load support for tool magazine SK50/HSK-A100 with 2 pockets at the stairs to magazine |
| Spindle speed 20 - 10,000 rpm HSK-A100 430 Nm | Spindle speed 20 - 10,000 rpm HSK-A100 for tool taper according to DIN69893 with power 52/42 kW // 69.7/56.3 hp with torque 430/300 Nm (40/100% ED) (differently from standard) |
| 3D quickSET elevated constructuion | 3D quickSET Tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations include additional fixture for elevated construction (only with option touch probe) |
| Tool laser measuring Blum | Laser tool measuring Blum (not with TT 140 possible, for pendulum machining please order 2 pieces) |
| Oil mist separator | Oil and emulsion mist separator system 2 pieces per machine implemented in right and left cabin side wall. mechanical filter system 2x1600 m³/h |
| Signal lamp 4-colour | Signal lamp 4-colour Red: general error Yellow: intervention necessary Green: automatic mode Blue: set-up mode |
| Air blast through spindle centre | Air blast through spindle centre activated by M function, maintained air, low oil rate possible |
| Internal Coolant Supply 80bar/980l frequency controled | Internal coolant supply (ICS) with paper type filter Papertype-Filter 20-80 Bar // 290-1160 psi frequenzy controlled 980 l tank // 258.8 gallon inclusive 2 rotating clear window, air purge for linear measuring system, rotary joint for main spindle |
| Chip flushing for working area | Flushing for working area Additional flushing of the working area doors and cabin sidewalls, Bed flushing included |
| Double cartridge filter,25 µm | Double cartridge filter, Finesse of filtration 25 µm (only in combination with internal coolant) |
| Coolant tempering for internal coolant 980l | Coolant tempering for internal coolant unit 980l / 259 gallon: Heating capacity max.: 4 kW / 5.3 hp Cooling capacity max.: 4 kW / 5.3 hp (only in combination with internal coolant unit 980l) |
| Door drive D5152871 for working area doors | Door drive for working area doors Open / close - activated by two-hand-operation at the control panel Safety sensor technology for prevention of accidents |
| MPC Machine Protection Control | MPC Machine Protection Control Machine protection by quick shutdown |
| proTIME | proTIME Visualisation of remaining runtime, remaining workpieces and the machine state |
| Application Tuning Cycle ATC | Application Tuning Cycle ATC programmable feed parameter selection for machining task: accuracy/surface/speed |
| Operation mode 4 | Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in. |
| Turning/Milling cycle | Turning / milling cycle For the machining of internal and external diameter using spindle orientation |
| DXF Reader | DXF-Raeder: Open CAD files Extracting of counters and drilling positions directly in G-code and ShopMill programs Supported elements: drilling positions and contours |
| angularTOOL | angular TOOL Technology cycle for programming of a 360 degree rotatable angular head tool |
| Laminated safety glass | Laminated safety glass for Windows in the two front doors |
| Exhibition design DMF | Exhibition design DMF chiller of electrical cabinet painted in electrical cabinet color; lighting of tool magazine; DMG-MORI set of labels; paper version of electrical plan |
| Stop block HSK-100/SK50/CAT50 | Stop block HSK-A100/SK50/CAT50 |
| Digital Manufacturing Package | Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b |
| Messenger V4 | The latest version of DMG MORI Messenger displays web based the machine live status. It allows to analyze the machine run-time, downtime, alarms in individually configurable dashboards and transparently shows the actual status in the manufacturing shop |
| Service Agent | Service Agent Overview of all maintenance work on the machine |
| Special equipment | SK001 Preparation for Hofmann RW/NC 400 with direct measuring system ready to plug right workspace Y-0404 Micro-Aerator: For clean coolant (50HZ) |
| 2016 | DMG MORI | DMF 260/11 | |
| DMG MORI | DMF 260|11 | ||
| DMG MORI | DMF 260|11 | ||
| 2016 | DMG MORI | DMF 260/11 KGT | |
| 2016 | DMG MORI | DMF 260/11 KGT | |
| DMG MORI | DMF 300|11 | ||
| DMG MORI | DMF 300|11 | ||
| DMG MORI | DMF 400|11 | ||
| DMG MORI | DMF 300|8 |
